HPVS-15-N-G1
2/2 normally closed high-pressure solenoid valve (stainless steel 316) · N seal · G1 coil
CS FLUIDPOWER HPVS-15-N-G1. 2/2 normally closed high-pressure solenoid valve (large-flow pilot diaphragm type), Investment-cast stainless steel 316 body. Orifice 15 mm, Cv 9.6, differential pressure 0.5-40 kgf/cm², fluid temperature -10 to 120 °C (oil 120 °C); N — NBR seal, G1 coil (WP-G1-D, square DIN 16 mm for AC/DC). Specify voltage, medium and thread when ordering.
Specifications
- Brand
- CS FLUIDPOWER
- Model
- HPVS-15-N-G1
- Size / rating
- 1/2 ″
- Material
- Investment-cast stainless steel 316
- Product configuration
- Large-flow pilot diaphragm type
- Category
- Valve
- Base model
- HPVS-15
- Flow paths
- 2/2
- Normal state
- Normally closed
- Structure
- Large-flow pilot diaphragm type
- Orifice
- 15 mm
- Port size
- 1/2 ″
- Flow coefficient Cv
- 9.6
- Differential pressure range
- 0.5-40 kgf/cm² (liquid/air/light oil 120 °C)
- Fluid temperature
- -10 to 120 °C (oil 120 °C)
- Body material
- Investment-cast stainless steel 316
- Seal material
- N — NBR
- Coil code
- G1
- Coil model
- WP-G1-D (square DIN 16 mm for AC/DC)
- Coil availability
- Per the manufacturer (Oct 2026) only WP-G1-D, WP-G2-D and CS-D2-D coils are in production; other coil types in the catalogue (E1/C1/D1/F1/EX etc.) are discontinued
- Media
- Liquids (water/hot water), air, gas, light oil (120 °C), vacuum, distilled water and weak alkalis
- Notes
- PTFE seal (T) is made to order; horizontal piping with coil facing up recommended
- Thread options
- PT (RC) / G-BSP (PF) / N-NPT / R-PS (RP), specified when ordering
- Order code
- HPVS-15-[seal]-[coil]-[medium]-[voltage]-[thread], e.g. HPVS-15-N-G1-A-220VAC-G
- Dimensions A×B×C (ref.)
- 75×52×115 mm
- Weight
- 0.88 kg
- Supply options
- Specify voltage when ordering
- DC supply note
- With DC supply the allowable differential pressure is 70% of the AC rating
Please note: The specifications above are compiled from manufacturer published datasheets, official websites and other public sources, for reference only, and are not a basis for acceptance or inspection. Actual parameters, dimensions and configuration are subject to the latest manufacturer datasheet and the delivered goods; where any discrepancy exists, the manufacturer data shall prevail. Contact us if you need the original datasheet or confirmed data for ordering.