ISP-ACAC40-PCA
ISP Integrato pulse sequencer (on-demand (built-in dP sensor) · 40 outputs · AC input/AC output · ATEX & cULus approved polycarbonate enclosure)
GOYEN ISP Integrato Sequencer for large reverse pulse jet filter cleaning systems; suitable for bag, cartridge, sintered metal and ceramic filters. Built-in differential pressure sensor sequences cleaning on demand. 40 solenoid outputs, ac input, ac output, atex & culus approved polycarbonate enclosure. Automatic pilot valve detection and voltage-free coil error output with on-display fault indication; rated down to -40 °C.
Specifications
- Brand
- GOYEN
- Model
- ISP-ACAC40-PCA
- Size / rating
- 40 路输出
- Material
- ATEX & cULus approved polycarbonate enclosure
- Product configuration
- Pulse sequencer · AC 100-240 V +/-10%, 50/60 Hz / AC 100-240 V (same as input) · 40 outputs · on-demand (built-in dP sensor)
- Product category
- Pulse jet controller
- Series
- ISP series (Integrato)
- Operating mode
- on-demand (built-in dP sensor)
- Order code
- ISP=with dP sensor; AC=AC input; AC=AC output; 40=outputs; PCA=ATEX & cULus polycarbonate enclosure
- Input voltage
- AC 100-240 V +/-10%, 50/60 Hz
- Output voltage
- AC 100-240 V (same as input)
- Maximum input power
- 255 W
- Discrete solenoid outputs
- 40 outputs
- Pilot valves per output
- AC up to 10 in parallel; Low AC 1; DC up to 3 in parallel
- ON time
- 30-990 ms, adjustable
- OFF time
- 1-999 s, adjustable (min. 5 s for ATEX)
- dP support
- 0-4.5 kPa
- Digital inputs
- Voltage-free: Fan Stop, Low Header
- Outputs
- Voltage-free: Coil Error
- Analog output
- 4-20 mA dP signal (ISP only)
- Enclosure type
- ATEX & cULus approved polycarbonate enclosure
- Protection rating
- IP 66/67 & NEMA 1, 3, 3S, 4, 4X, 6, 6P, 12 (large) / IP65 & NEMA 1, 4, 4X, 12, 13 (small)
- Operating temperature
- -40…+60 °C
- Humidity
- 20%-85% non-condensing
- Maximum altitude
- 2000 m
- Connection option
- 3 A rated MCB or ELCB protected branch circuit
- Approvals
- CE, FCC, RCM, cURus, cULus, ATEX
- Application
- Large reverse pulse jet systems; bag, cartridge, sintered metal or ceramic filters
Please note: The specifications above are compiled from manufacturer published datasheets, official websites and other public sources, for reference only, and are not a basis for acceptance or inspection. Actual parameters, dimensions and configuration are subject to the latest manufacturer datasheet and the delivered goods; where any discrepancy exists, the manufacturer data shall prevail. Contact us if you need the original datasheet or confirmed data for ordering.